Rover 75 / MG ZT Rear Numberplate Lamp Assembly - XFC000220MMM / XFC000011MMM / XFC000010
Original OE-supplier part. Limited stock available.
A range of options for either repairing or replacing your Rear Number Plate Lamp on your Rover 75 or MG ZT. Please read all of the information below carefully, so you know exactly which part you need.
Ideal if your Rover 75 or MG ZT suffers from the common PCB track failure of this item, causing lighting problems.
PCB Kits - These kits include a brand new PCB, ready to fit with all bulb holders and connectors in place. No soldering is required - you only need a screwdriver and a small pair of pliers / snips to fit this item. The power connectors are also soldered in place rather than riveted, to avoid the original mode of failure.
We're now on our newly-developed V2 of this PCB - instead of the bulb holders being riveted in place, they're now secured with high-tensile Stainless Steel bolts and Nyloc nuts. This means there's maximum clamping force between the bulb holder and circuit board, preventing repeat failure.
Fitting is simple - disassemble your old lamp assembly, swap the PCB, and rebuild. This will take around 15 minutes, and only requires a screwdriver and a pair of pliers / snips. You may also need a small amount of glue to secure the new PCB in place within your existing holder. Available with and without new bulbs fitted.
Lenses - Pair - These are brand new lenses for all versions of the rear number plate lamp assembly. Does not include gaskets.
Bulbs - Pair - Standard 5w 239 Festoon bulbs for all Rover 75 and MG ZT rear number plate lamps. These are the original factory fit items, so will likely last many years as the originals did.
|Part Number:||XFC000220MMM / XFC000011MMM / XFC000010|
|Fitment:||Rover 75 Saloon, MG ZT Saloon (all models)|
|Manufacturer:||OEM Factory Supplier|